Can I set up the SRAM RED eTap 2x11 system to do sequential shifting? December 03, 2019 16:46 Updated No. The rider always controls the front derailleur. Related articles Can I customize the shifter paddle or blip operation? E.g. have the left paddle shift up or connect two blips to one shifter and have each blip shift in a different direction? Is RED eTap software or firmware open source? Can I get into the code and tweak it to make it work with 10-speed or change the shift speed at different points in the rear derailleur’s sweep? Can I hold down the eTap 2x11 shift lever to do a rear multi-shift? Can I program the shift speed? Will SRAM make periodic eTap 2x11 firmware updates?