Logo
  1. SRAM Technical Service FAQ
  2. SRAM RED eTap 2x11
  3. Programming

Programming

  • Is RED eTap software or firmware open source? Can I get into the code and tweak it to make it work with 10-speed or change the shift speed at different points in the rear derailleur’s sweep?
  • Can I set up the SRAM RED eTap 2x11 system to do sequential shifting?
  • Can I customize the shifter paddle or blip operation? E.g. have the left paddle shift up or connect two blips to one shifter and have each blip shift in a different direction?
  • Will the blips only perform the same shifting operation as the shifter they are connected to for eTap 2x11?
  • Can I hold down the eTap 2x11 shift lever to do a rear multi-shift?
  • Can I program the shift speed?
  • Can you program in automatic rear compensation shifts when making front chainring selections? i.e. shifting to the small ring and simultaneously shifting into a smaller rear cog?
  • Will SRAM make periodic eTap 2x11 firmware updates?
  • Does the eTap 2x11 front derailleur know where in the pedal stroke I am and time the shift accordingly for optimal shifting?
  • Does SRAM make a head unit that is compatible with SRAM RED eTap?
  • Can the SRAM RED eTap 2x11 components communicate with my iOS or Android device?
  • Can I record and display my gear selection on a head unit throughout different points in a ride?
  • Can Quarq power meter data be combined with gear selection data using SRAM or Quarq software when using SRAM RED eTap 2x11?
SRAM Technical Service FAQ
English (US) Deutsch Français